#1 Pure Cut Heavy/Medium Abrasive Compound (16 oz. Btl.)
- Heavy swirl & oxidation removal
- Medium scratch removal
- Lubricated, fast acting abrasive cut
- Removes 1200-1500 grit sand marks
- Will not load up wool or foam pads
- Contains no silicon – body shop safe
Pure Cut is a lubricated compound designed with high quality uniform abrasive materials that break down to a fine compound at a slower rate than average products so heavier scratches & swirls are effectively removed. Pure Cut has been designed to remove 1000-1200 grit sanding marks even on tougher European clear coats. Very fast acting and will not load up on foam or wool pads.
By Machine: Shake well. Clean and dry all surfaces. Use either a wool or foam medium cutting pad. Dispense a small amount of product on the desired surface and spread evenly using the face of the buffer pad. Start buffing with firm pressure and gradually reduce. Work areas to desired finish and remove residue with a soft clean cloth. By Hand: Shake well. Apply a small amount to surface and rub in a circular motion with a polishing cloth. Remove residue off with a separate soft clean cloth. Keep product from temperature extremes. If product becomes frozen let thaw and shake vigorously to re-establish consistency.
USE WITH THE LAKE COUNTRY YELLOW CCS PAD FOUND UNDER “LAKE COUNTRY PRODUCTS.”
There are no reviews yet.