Menzerna 439 T Green Rouge Bar (Approx. 2.5 lb. Green Bar; Heavy Cut ,3 Pack)

Description

Menzerna 439 T Green Rouge Bar (Approx. 2.5 lb. Green Bar; Heavy Cut ,3 Pack)

GREAT FOR ALUMINUM, STAINLESS STEEL. IF YOU NEED AN AGGRESSIVE BAR FOR POLISHING ALUMINUM OR STAINLESS STEEL, THIS MENZERNA ROUGE BAR WILL BE A GREAT BAR TO USE. THIS BAR IS MORE AGGRESSIVE THAN A STANDARD BROWN BAR AND PROVIDES ABOUT THE SAME AMOUNT OF SHINE. IT IS PERFECT FOR THE INITIAL CUT. DENIS WITH D C SUPER SHINE TRIED THIS BAR WITH A POLISHER AT 3000 RPMS AND WAS AMAZED AT HOW WELL IT CUT. HE STATED THAT THIS BAR IS IDEAL FOR THOSE WHO CUT AT LOWER AND HIGHER RPMS. IN KEEPING WITH THE OTHER MENZERNA ROUGE BARS, YOU WILL USE LESS ROUGE AND YOU WILL GET LESS DUST IN THE WORKPLACE WITH THIS BAR. CONSIDERING THE DEGREE OF CUT, THIS BAR ALSO PROVIDES A NICE LEVEL OF SHINE. WE RECOMMEND THE ULTIMATE PERFORMANCE FAST CUT 20 PLY BUFFING WHEEL WITH THIS BAR (FOUND UNDER D C SUPER SHINE KITS AND POLISHING SUPPLIES), OR THE ZEPHYR FAST CUT/KWIK KUT WORKS WELL ALSO.

WHEN IT COMES TO POLISHING ALUMINUM WITH MENZERNA ROUGE BARS THE CHOICES ARE AS FOLLOWS:  439 T GREEN BAR FOR A HEAVY/PRIMARY CUT; P14F WHITE BAR FOR A MEDIUM/SECONDARY CUT; 480 BLF BLUE BAR FOR A FINAL FINISH; P 175 WHITE FOR A HIGH LUSTER SUPER FINISH. FOR MOST POLISHERS A SIMPLE TWO STEP SEQUENCE WILL PROVE SUFFICIENT. THIS SEQUENCE WOULD BE TO START WITH THE 439 T (GREEN) AND FINISH WITH THE 480 BLF (BLUE). IF YOUR ALUMINUM PROJECT IS JUST MODERATELY OXIDIZED OR IN DECENT CONDITION YOU CAN START WITH THE MEDIUM CUT P14F WHITE BAR. THIS  WHITE BAR CAN BE USED AS A STAND ALONE, OR YOU CAN FOLLOW UP WITH THE 480 BLF BLUE. THE P 175 SUPER FINISH BAR IS FOR METICULOUS POLISHERS WHO ARE LOOKING FOR A FLAWLESS FINISH. IT IS TO BE USED AFTER THE 480 BLF BLUE BAR.

NOTE: THE MENZERNA 113 GZ BROWN BAR  IS A BAR SPECIFICALLY FORMULATED TO EXCEL ON BRASS. IT CAN BE USED ON ALUMINUM AND STAINLESS BUT THE SELECTION PRESENTED IN THE PRECEDING PARAGRAPH IS TO BE PREFERRED. THE D C SUPER SHINE STANDARD KIT WILL NO LONGER HAVE THE BROWN MENZERNA BAR IN IT. THE P14F WHITE IS PERFECT FOR THIS KIT AND WILL REPLACE THE BROWN.

IF YOU ARE POLISHING STAINLESS STEEL, PLEASE NOTE THESE RECOMMENDATIONS: 523 LBZ BAR  FOR A HEAVY/PRIMARY CUT;  IF YOU WANT A MEDIUM/SECONDARY CUT BAR THE 333 ROUGE BAR SHOULD BE USED. THE 126 PINK STAINLESS STEEL BAR IS THE FINAL FINISH BAR FOR STAINLESS. IF DESIRING THE CONSUMMATE SHINE, FINISH WITH THE P 175 SUPER FINISH BAR.

For more rouge/buffing wheel selections and combinations, see under “Menzerna Compounds and Rouges” and “D C Super Shine Kits And Supplies.”