KIT#1. DC Super Shine Original Heavy-Cut Polishing Kit with 10″ Buffing Wheels (Buffing Wheels have Center Plates)

$149.95

Description

KIT#1. DC Super Shine Original Heavy-Cut Polishing Kit with 10″ Buffing Wheels (Buffing Wheels have Center Plates)

 THERE ARE  TWO D C SUPER SHINE KITS TO CHOOSE FROM. THE DIFFERENCE BETWEEN THE TWO KITS IS THIS: THE FIRST KIT SHOULD BE SELECTED FOR PROJECTS REQUIRING HEAVY CUTTING. THE MENZERNA PALE GREEN BAR USED IN THIS KIT IS A VERY IMPRESSIVE HEAVY CUTTING BAR. THE AMOUNT OF SHINE FOR THE CUT IS EQUALLY IMPRESSIVE. THIS ALLOWS THE POLISHER TO GO DIRECTLY TO THE FINAL STAGE IN WHICH WE NOW EMPLOY THE MENZERNA FINAL FINISH BLUE BAR. WE HAVE WAITED FOR MONTHS TO BE ABLE TO OFFER THIS ROUGE BAR. POLISHERS WHO HAVE TRIED IT HAVE COMMENTED ABOUT THE DEPTH, CLARITY, AND BRILLIANCE PRODUCED BY THIS BAR. ONE POLISHER WHO HAS POLISHED TRUCKS ACROSS THE U.S. FOR OVER 20 YEARS SAID THAT THIS BAR FAR EXCEEDED HIS EXPECTATIONS.

THE SECOND D C SUPER SHINE  KIT  BEING OFFERED IS THE STANDARD KIT FOR LIGHT TO MODERATE OXIDATION OR MAINTENANCE. THIS KIT HAS BEEN VERY WELL RECEIVED FOR SOME TIME NOW FOR MANY DIVERSE APPLICATIONS. WE EXPECT THAT IT WILL BE RECEIVED WITH EVEN GREATER ENTHUSIASM NOW THAT WE ARE EMPLOYING THE MENZERNA PF14 WHITE BAR IN THE KIT FOR THE INITIAL CUT. THIS WHITE BAR HAS BEEN TESTED BY NUMEROUS POLISHERS  AND EACH ONE OF THEM COMMENTED ABOUT THE MINIMAL CUT LINES, CLEANNESS AND CLARITY. THEY ALL SAID THEY WANT THIS BAR FOR THEIR WORK. THE WHITE P14F BAR IS NOT AS AGGRESSIVE AS THE MENZERNA GREEN 439 T BAR. PLEASE NOTE THAT WE HAVE NOW INSERTED THE MENZERNA BLUE BAR IN BOTH KITS . UNLIKE MANY BLUE ROUGES, THE MENZERNA BLUE ROUGE HAS A FINE CUT TO IT AND DOES A SUPERB JOB ON FINISHING ALUMINUM. IT IS A BAR THAT WAS SPECIFICALLY FORMULATED BY MENZERNA FOR FINISHING ALUMINUM.

THE CONTENT OF THIS KIT IS AS FOLLOWS:

* TWO 10″ KWIK KUT ORANGE/YELLOW AIRWAY BUFFING WHEELS
* TWO 10″ SUPER SHINE WHITE/BLUE UNTREATED AIRWAY BUFFING WHEELS
* ONE KEYSTONE SAFETY FLANGE KIT (IN ADDITION TO THE TWO FLANGE DISCS, WE HAVE ADDED     TO THIS KIT A 5/8″   X 11 POLISHER WASHER AND NUT.)
* ONE MENZERNA GREEN HEAVY CUTTING ROUGE BAR
* ONE MENZERNA BLUE FINISHING ROUGE BAR
* ONE POLISHING RAKE
* ONE 16 OZ. BOTTLE ZEPHYR PRO 25 METAL POLISH

(NOTE: THE CENTER PLATES IN THE BUFFING WHEELS IN THIS KIT CANNOT BE REMOVED; THUS THEY CANNOT BE USED WITH A CENTERING FLANGE SET.)

NOTE: YOU WILL NEED A POLISHER WITH A 5/8″ ARBOR SHAFT IN ORDER TO USE THIS KIT. OTHERWISE, SEE ADAPTERS UNDER “ZEPHYR BUFFING PRODUCTS.” THE ARBOR SHAFT OF THE POLISHER MUST BE AT LEAST 3/4″ IN LENGTH. ONE INCH IS PREFERABLE IN ORDER TO HAVE THE BUFFING WHEEL FAR ENOUGH AWAY FROM THE POLISHER. IF THE SHAFT IS LESS THAN ONE INCH WE RECOMMEND PURCHASING THE 2″ EXTENDER KIT FOUND ON PAGE ONE UNDER “ZEPHYR BUFFING PRODUCTS”. THIS HANDY ACCESSORY MOVES THE BUFFING WHEEL 2″ AWAY FROM THE POLISHER.

IMPORTANT: ALWAYS WEAR A FACE SHIELD OR SAFETY GOGGLES WHEN USING THIS KIT TO POLISH ALUMINUM. PAY ATTENTION TO MANUFACTURER RECOMMENDATIONS. THE BUFFING WHEELS IN THIS KIT ARE RATED FOR A MAXIMUM 3400 RPMS. WHILE SOME POLISHERS MAY CHOOSE TO POLISH AT HIGHER RPMS, IT IS IMPORTANT TO NOTE THE RECOMMENDED LIMITS. EXCEEDING THE RECOMMENDED RPM RATING CAN CAUSE SERIOUS INJURY.

Additional information

Weight 1 lbs

Reviews

There are no reviews yet.

Be the first to review “KIT#1. DC Super Shine Original Heavy-Cut Polishing Kit with 10″ Buffing Wheels (Buffing Wheels have Center Plates)”