Menzerna P14F White Rouge Bar (Approx. 3 lb. Bar; Medium Cut for Aluminum)

$17.95

Description

Menzerna P14F White Rouge Bar (Approx. 3 lb. Bar; Medium Cut for Aluminum)

The feedback we received when we had numerous polishers test this bar was not just positive, but enthusiastic. Each polisher who tested this bar prior to us ordering it, commented about the clarity of the cut and the fact that their were either no or very few cut lines. Every one of them said, “we want this bar when you get it.” Denis with D C Super Shine called me on a Saturday night to tell me – “you have to get this bar!” Well, it’s here and now available. There are several ways you can use this bar. Here are three suggestions:

1. Use the P14F bar after cutting with the Menzerna 439 T heavy cut bar. If doing this, use a fast cut buffing wheel selection with the green bar and then go to a blue buffing wheel or another medium cut buffing wheel to use with the P14f white bar. Finish then with the Menzerna 480 BLF rouge bar and a white untreated or flannel buffing wheel. Those polishers who tried this sequence raved about the results.

2.  Use the P14F bar as your starting point if polishing something that is in decent condition, in other words, not severely oxidized. If doing this, use a fast cut buffing wheel selection and then finish with the Menzerna 480 BLF rouge bar with an untreated or flannel buffing wheel.

3. Lastly, you can use this bar as a “stand alone” rouge bar and you may be very happy with the results without any additional steps. This may be the case if the project you are working on is in good  or decent condition. Use a fast cut buffing wheel in this case, or you may be able to use a finish wheel such as a white untreated buffing wheel or one closely equivalent.

As with all of the Menzerna rouge bars you will find in using these bars that “less is more.” The performance of these bars is second to none. the P14F bar will be the new bar in the D C Super Shine standard kit. It is better suited than the brown bar for the purpose of the standard kit. The 114 GZ brown bar is actually more ideal for brass than aluminum; therefore the change to the P14F white bar.

For more rouge/buffing wheel selctions and combinations, see under “Menzerna Compounds and Rouges” and “D C Super Shine Kits And Supplies.”

Reviews

There are no reviews yet.

Be the first to review “Menzerna P14F White Rouge Bar (Approx. 3 lb. Bar; Medium Cut for Aluminum)”